Posted on

CNH DPA5 Work with CAT ET Diagnostic Software Configuration Guide

CNH DPA5 Work with CAT ET Diagnostic Software Configuration Guide

 

Steps:

1. Start CAT ET Program.
2. Click Utilities ► Preferences ► Communications from the menu bar.
3. Click on
Communication Interface Device dropdown box.
4. Select
RP1210 Compliant Device.
5. Click
Advanced
6. Select DPA 5 Dual CAN USB in the RP1210 Communication Adapter Device box.
7. Click
OK
8. Check Enable Dual Data Link Service
9. Click OK.

Posted on

How to Configure Allison DOC Work with CNH DPA5 Kit?

CNH DPA5 Kit support many OEM software,here autoepccatalog.com show you steps on how to setup Allison DOC work with CNH DPA5 diagnostic adapter.

 

Procedures:

1. Start Allison DOC program.
2. Click
Connect to Vehicle.
3. Select the Correct Transmission Type.
4. Uncheck
Smart Connect.
5. Click
Connect.
6. Click
Advanced Setup.
7. Select vendor of
Dearborn Group DPA 5 Multiple Application.
8. Select protocol of
J1939 or J1708.
9. Select correct device of
DPA 5 Dual CAN USB.
10. Click
OK