Here is the instruction show you guide on how to separate clutch housing and mid for Kubota L4701 tractor.
Related Contents:
[06.2025] Kubota DiagMaster 25.02.01 Level 9 Takechi,Manitou,Carrier,Nonself
[06.2021]Kubota EPC PAD KDG+LinkOne EPC 2003 2 in 1 VMware
Genuine Kubota DST-i Diagnostic Adapter
Outer Components
1 Remove the mounting bolts and the steering support (1).
2 Disconnect the differential lock pedal.
3 Remove the step (2) and the main wiring harness.
Suction Pipe and Hydraulic Block
1 Remove the suction pipe (5).
2 Remove the hydraulic block (3).
3 Remove 3P delivery pipe (1).
4 Remove the brake connecting rod R.H. (4) and L.H.. (When reassembling)
Apply grease to the O-rings.
Separating Clutch Housing Case from Mid Case
1 Loosen and remove the screws and the nuts securing the clutch housing case (1) to mid case (2).
2 Separate the clutch housing case (1) from the mid case (2). (When reassembling)
Replace the gasket with a new one.
Separating Mid Case from Transmission Case
1 Loosen and remove screws and nuts securing mid case (1) to transmission case (2).
2 Separate mid case from transmission case (2).
(When reassembling)
Apply liquid gasket (Three Bond 1208D or equivalent) to joint face of mid case and transmission case after eliminate water, oil and stuck liquid gasket.
