This instruction show you guide on how to repair Scania truck CUV 11 front foglamp trouble.
Front foglamp
Error identification
The current consumption on the control unit output has exceeded 12A.
Preparations:
Scania SDP3 2.65.2 Truck Diagnostic Software
Cause
Short circuit in the relay for current consuming equipment R19 or in the cable harness.
Notes
Front foglamp is inoperative. Every time the function is activated, the current consumption on the control unit output is checked. If the current consumption is too high, the output is switched off and a fault code is registered.
Action
Check the bulbs. Also, check the number of connected lamps in circuit. Check whether there is a short circuit to ground.
