Here is the instruction show you guide on how to perform lubrication lockout test for MANITOU MT6034 construction telehandlers.
Related Contents:
2026 Manitou I.V Interactive View Diagnostic Software
Procedures:
To test the transmission and joystick control lockout logic:
1. Shift transmission into “F” (Forward) and increase the engine speed slightly.
The transmission should remain de-clutched,allowing the engine to increase speed easily.
Return the transmission selector to “N” (Neutral) after the check.
2. Have an assistant move the remote shutdown switch to “Dis-engaged.”
The joystick control should now be disabled, so that boom raise/lower and extend/retract will no longer function.
Have the assistant move the remote shutdown switch to “Engaged” after the check.
3. Tilt the frame to the right slightly more than two degrees.
The joystick control should now be disabled so that boom raise/lower and extend/retract no longer function.
Repeat the procedure with the frame tilted to the left.
Return the frame to a level position after the checks.
