Here is the instruction show you guide on how to remove hydraulic accessories pump for CLAAS AXION 960-920 A64 Stage V tractor.
Related Contents:
NEW CLAAS Diagnostic Interface 4 CAN
CLAAS Webtic Offline Repair and Service
CLAAS CDS 7.5 Diagnostic System 2021.05
Environment!
Lubricants and fuel are harmful to the environment.
Pollution
► Collect lubricants and fuel in appropriate containers; store and dispose of them in accordance with the regulations in force.
Removal
Remove the rear left-hand wheel.
► Remove the mounting bolts (1).
► Remove the pipe (2).
► Tilt the intake pipes (1) backwards.
► Remove the mounting bolts (2) for pump “2084”.
► Remove pump “2084”
Fitting
Respect the technical specifications from the overview.
► Fit pump “2084” with the coupling seal.
► Fit the mounting bolts (2) for pump “2084”.
► Fit the inlet manifold (1).
Check for the O-ring between the manifold (1) and pump “2084”
Respect the technical specifications from the overview.
► Fit and tighten the pipes (2).
► Fit the mounting bolts (1).
► Fit the rear left-hand wheel.
► Perform an operating check.
