This instruction show you guide on how to remove right-hand impeller bearing for CLAAS Lexion 480 combine.
Related Content:
NEW CLAAS Diagnostic Interface 4 CAN
CLAAS Webtic Offline Repair and Service
CLAAS CDS 7.5 Diagnostic System 2021.05
Removing the right-hand impeller bearing
Open the large side panel.
Relieve the tension of threshing drum drive belt (23).
Unbolt the jockey pulley (S).
Remove the grease pipe (L) from the bearing assembly.
Unscrew the set screw from the lock collar and knock off the lock collar against its normal rotational direction.
Remove the four M assembly (E).
Pull off the bearing assembly using a special tool (S).
