This instruction show you guide on how to solve Detroit DD13 engine EPA10 SPN 51 FMI 2 MCM intake throttle position deviation error.
Related Contents
This code sets when the Intake Throttle Valve position has A15%deviation from the position commanded by the Motor Control Module (MCM) when the engine coolant temperature is above 60°C (140°F)
MONITORED PARAMETER:
Intake Throttle Valve (ITV)
TYPICAL ENABLING CONDITIONS:
Coolant temperature isgreater than 60C (140°F).
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Continuous when enabling conditions met.
TYPICAL DURATION:
Five seconds
DASH LAMPS:
1 MIL
2 CEL
ENGINE REACTION:
10% Derate
VERIFICATION:
Engine rpm = 600 rpm or higher.
POSSIBLE CAUSES:
1 Faulty ITV motor.
2 Faulty ITV position sensor.
3 Sticking ITV.
PROBABLE CAUSES:
1 Air throttle valve harness.
2 ITV harness connector.
3 Intake throttle valve failure.
4 Cold temperatures may falsely cause this code to appear.
5 Intake throttle valve sensor.
