Noregon DLA 2.0 Adapter Error Codes
| 704 | An invalid buffer parameter was used. |
| 705 | The packetization flag should be 1 or 0. |
| 706 | Blocking while using window handle notifications is not allowed. |
| 707 | One or more of theFilters have an invalid length. |
| 708 | The data length for this protocol has been exceeded. |
| 709 | The Command buffer is too small. |
| 710 | The CAN Bit Timingvalues are invalid. |
| 711 | This command is not supported with the current protocol. |
| 712 | The J1939 address is no longer valid. |
| 713 | Multiple J1939 clients must use same packetizing methods. |
| 714 | Device detected but not responding to commands. |
| 716 | Anexisting client is connected to the FLASH protocol. |
| 717 | ERR_GET_DEVICE_STATUS_FAILED |
| 718 | The command failed. The command required to device to be in ‘Boot Mode’. |
| 719 | Failed to set device to “Boot Mode’. |
| 720 | Failed to set device the starting firmwareaddress. |
| 721 | Failed to set the end firmware address. |
| 722 | Failed to send ROM data to the device. |
| 723 | Failed to manifest device for firmware update. |
| 724 | Failed to obtain the device status. |
| 725 | The USB interface is in use. Wireless connections is notallowed at this time. |
| 726 | The Wireless interface is in use. USB connections is not allowed at the time. |
| 727 | Failed to get the protocol connection speed. |
| 728 | A DLA+Wireless adapter is not configured for connection. |
| 729 | An existing client is connectedto the WIRELESS_CONFIG protocol. |
| 730 | ERR_FAILED_TO_START_SERVER |
| 731 | ERR_FAILED_TO_CONNECT_TO_SERVER |
| 732 | Failed to get the protocol connection speed. |
| 733 | Incorrect or invalid firmware version for your DLA+ family adapter. |
| 734 | Failed to load theregistry values for your DLA+ family adapter. |
| 735 | Failed to load the firmware update files for your DLA+ family adapter. |
| 736 | Failed to update the firmware version of your DLA+ family adapter. |
| 737 | Failed to read the firmware version of your DLA+ familyadapter. |
| 738 | Failed to obtain the device status during firmware update connect. |
| 739 | Failed to obtain the device status during firmware perform update. |
