AGCO 2×4 CANUSB Interface Diagnostic for AGCO Massey Ferguson FENDT

Description

AGCO 2×4 CANUSB diagnostic Tool is special diagnostic kit for AGCO group machine,it support agricultural tractors and construction heavy duty machine.diagnosis.AGCO 2×4 CAN USB work with AGCO EDT,Fendt Fendias,WinEEM4,WinEEM5 diagnostic software.AGCO 2×4 CANUSB channel adapter capable of reading four CAN BUS network channels on a single vehicle (two channels at once).AGCO 2×4 CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT software application.

AGCO 2×4 CANUSB adapter for EDT is a 2×4 channel adapter capable of reading four CAN BUS network channels on a single vehicle (two channels at once).AGCO 2×4 CANUSB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT software application.

 

AGCO 2×4 CANUSB Diagnostic Kit Features:
High Quality
Part number 930203400
Free Shipping by Fedex/UPS/DHL
One year warranty
This price only for AGCO 2×4 CANUSB Interface,it is not include AGCO EDT software

Note:This is standard package with cables,for different brand like Fendt machine,it requires you with extra cables.

 

AGCO 2×4 CANUSB Diagnostic Kit Compatible Software:
AGCO Electronic Diagnostic Tool EDT
AGCO Wintest
AGCO SISU Power WinEEM4 Service Tool 2.9.0
FENDT FenDias v2.2024
Massey Ferguson WinTest 2.20.09

 

AGCO 2×4 CANUSB Support on AGCO EDT Functions:

Full network scan and ECU status reporting

Active and Inactive ECU error message retrieval

Integrated ECU error message diagnostic troubleshooting trees

Troubleshooting trees specifically authored for individual errors codes

CAN BUS network tracing and save feature, and ability to export the trace

Diagnostics by system

Software flash to multiple or single ECUs

Full configuration of ECUs

Multi-language selection capability from within the tool

Software updates and upgrades using an internet connection

Ability to activate some third-party support software from within the EDT application

 

 

AGCO 2×4 CANUSB Diagnostic Kit Support Functions:

Actuators

Air system

Engine Rail High-Pressure

Engine Run-Up

Engine Compression

Cylinder Cut-Out

PCV Hysteresis

Pressure Delivery Rate

SCR Emptying

SCR Pressure Build-up

SCR Dosing Rate

Catalyst Cleanup

Visco Fan Speed

…

 

AGCO 2×4 CANUSB Driver Download

AGCO 2×4 CANUSB Driver no need download and install extra,it is installed automatically by AGCO EDT software.If you need AGCO 2×4 CANUSB Driver please contact my team.

 

 

How to Use AGCO 2×4 CANUSB?

The cables plug into the vehicle side of the 2×4 CAN USB and can be used either independently or in combination.

Connect 2×4 CAN USB to laptop USB port.

Connect the vehicle side cables to the 2×4 CAN USB protocol adapter. Follow the instructions in the machine’s service manual for connection information to the electrical system for the machine.

 

 

AGCO 2×4 CANUSB Diagnostic Kit Coverage:

AGCO;

RoGator;

Challenger;

ISEKI;

FENDT;

SISU;

FELLA;

SpraCoupe;

GLEANER;

Sunflower;

Laverda; 

TerraGator;

Massey Ferguson;

Valtra;

WHITE Planters.

Note:for real brands support depends on AGCO EDT software,currently AGCO Offline version can not support all brands.

 

 

AGCO 2×4 CANUSB Laptop Requirements

AGCO 2×4 CANUSB work with AGCO EDT and Fendias software laptop requirements:

Hardware:Windows 10,11 Pro 64 bits recommended

Processor:Intel i3,i5 or i7 at least 2.0 GHz

RAM Memory:8GB

Hard Drive Memory:500GB SSD recommended

Ports:High Speed USB 2.0 port

Network Interface:1 x RJ-45 10/100/1000 Mbps full duplex DMI or wireless

 

 

What is Difference between AGCO 2×4 and AGCO 4×4 CANUSB?

1 AGCO 2×4 and AGCO 4×4 CANUSB both support AGCO EDT,AGCO WinEEM4,EEM5,AGCO Wintest,Massey Ferguson WinTest and Fendt Fendias software.

2 AGCO 4×4 CANUSB support Deutz Serdia4.0,but AGCO 2×4 CANUSB cannot support it.

 

 

AGCO 2×4 CANUSB Feedbacks:

Feedback 1:

I use 2×4 CANUSB to update software on EEM4 ecm successfully.

Feedback 2:

Test it on Fendt Vario 700 COM III with Fendias software,it worked.

Feedback 3:
MF & Challenger tractors are available on EDT.
FENDT – in EDT only combines, for tractors you need additional FENDIAS program.
2×4 CANUSB (red color) can be used with EDT and FENDIAS and all other programs what comes with them (WinEEM for SISU etc.).
CANUSB (black color) can be used with FENDIAS and SISU only.

 

 

AGCO 2×4 CANUSB Video

 

AGCO 2×4 CANUSB Diagnostic Kit Included:

1 pc 2×4 CANUSB Interface
2 pc  9-pin Deutsch cables
1 pc 2 x 4-pin cables for Fendt
1 pc 12-pin cable for Fendt
1 pc 16-pin cable for Massey Ferguson and Valtra